ReCorr Corrugator Bridge Guide

Share With a friend:

Receive a Free Quote
ReCorr Web Guide System for Corrugator Machinery

The ReCorr web guides system aligns the corrugated medium and liner layers together before exiting the bridge and before entering the preheater section of the double backer. Reducing this layer misalignment means narrower final product edge trim requirements, less scrap and wider final sheets. 

 

Automatically compensates for medium width changes, eliminating the need for operator intervention.

 

Reduces tears and breaks.

 

Corrugator bridge guide placement

ReCorr bridge guide for corrugating machine web alignment

The ReCorr bridge guide system is installed on the exit of the corrugator bridge. It is an ideal solution for reducing waste and as a replacement guiding system.

 

Reduces Waste

Aligning corrugated medium and liner layers together before exiting the bridge and before entering the preheater section of the double backer. Reducing this layer misalignment means narrower final product edge trim requirements, less scrap and wider final sheets.
Automatically compensates for medium width changes, eliminating the need for operator intervention.
Reduces tears and breaks.

 

Ideal Replacement for the Following Setups

Vacuum guides - Can be unreliable for positioning and impart uneven tension along the width of the web. If replacing a vacuum guide system, a new bridge tensioning device will also be needed in addition to the ReCorr bridge guide. Contact your Double E sales territory manager for more details and a quote on a tensioning device

 

Lateral Mechanical Guides - Mechanically "force" the medium into position with side plates and can tear or break the medium. Especially if there are width changes.

 

Existing Bridge Guiding Units - Older steering systems with automatic control can be very complex and costly to replace or upgrade.

 

The center guide system is able to control the material thus preventing collision with the lateral guides and avoiding material breaks especially during width changes.

Wide angle FISH EYE sensor: The metallic enclosure consists of a motorized guide group, two FISH EYE wide angle reading sensors with control system and solenoids.
Plug & Play installation: The system is supplied as a Plug & Play solution which is pre-wired and extremely easy to install to the existing machine.
Master / Slave Configuration: Ability to control multiple slave units on one control unit.

You Might Also Be Interested In...


Receive a Free Quote